Product Description

Connector Tile is an upgraded design of the Composite Rubber Tile, while retaining the top wear layer, only changing the original flat bottom design to a shock absorbing design and adding hidden holes for the connectors.

The base of this tile is made of coarse rubber granules. For quality, we add a layer of high-density rubber powder between the wear-resistant layer and the coarse particles, which not only makes the surface of the tiles smoother, but also makes the wear-resistant layer and the substrate stronger.

Regular size are 50cm x 50cm and100cm x 100cm.

Special size is 100cm x 50cm.

Thicknesses range from 20mm to 50mm.

 

 

 

Edge & Corner System is a perfect complementary solution to rubber tile installation. They are designed with a slope, which gives a smooth and safe transition zone between the floor and the tiles, reducing the risk of tripping.

 

 

Due to the physical properties of rubber's thermal expansion and contraction, the tiles usually shrink less in the summer, so the dimensional tolerances will be slightly larger, while the tiles shrink more in the winter, so the dimensional tolerances will be slightly smaller.

In addition, the smaller the thickness of the tiles, the greater the shrinkage, and the greater the thickness of the tiles, the lesser the shrinkage.

But for the same batch, we can usually control the size difference of different tiles within 5mm.

 

We always choose safe packaging methods to ensure that no damage occurs to the product due to packaging.

We will stack the tiles on pallets and put protective corners around them, then wrap them in plastic film, cover the top with a protective board, and finally secure them with PE/PP straps. After packing, each pallet is labeled with the item and quantity. When loading the container, we will use airbags to fill the extra space inside the container to ensure that the pallet undergoes minimal shaking during transportation, which will prevent the pallet from collapsing.